Skyjack 4632 - Page 94

SECTION 6, Page 5SJIII Series - The Conventionals 129919
Figure 6.1-1. Entrance Gates And Chains
Index
No.
Skyjack
Part No.
DescriptionQty.
1 128471 1 WELDMENT, Full Gate Hinged - Bottom (ANSI/CSA)
128487 1 WELDMENT, Full Gate Hinged - Bottom (CE)
2 110693 1 PLATE, Stop Gate Latch
3 103632 AR SCREW, Self tapping ¼”-14 x ¾”
4 (Ref.) - LATCH ASSEMBLY
(For components, refer to Figure 6.1-15)
5 128473 1 WELDMENT, Full gate Hinged - Top
6 117277 2 HINGE, Spring
7 (Ref.) 2 PIN, Quick release large/small loop assembly
(For components, refer to Figure 6.1-7)
8 119942 1 CLAMP, Aluminum door sweep (CE)
119945 4 • RIVET, Wide head
9 119940 1 STRIP, Door sweep rubber (CE)
10 106893 - CHAIN, Entry Assembly (If equipped)
106896 1 • CHAIN
100297 1 • LINK, Quick screw
127103 1 • LINK, Lap
100493 1 • LATCH, Chain snap
11 130270 2 MOUNT, Railing end weldment (If equipped)
12 125692 1 RAIL ASSEMBLY, Upper hinged
125354 1 • TUBE, Hinged top rail
125691 1 • PADDING, Entry rail
103872 AR • BOLT, Hex head 3/8”-16 x 2.25” Gr. 5
104606 AR • NUT, Hex nylon lock 3/8”-16”
112327 2 • SCREW, Self tapping #8-18 x 1/2”
13 125703 1 RAIL ASSEMBLY, Fixed upper
103540 1 • TUBE, Top rail
125691 1 • PADDING, Entry rail
103864 2 • BOLT, Hex head 5/16”-18 x 1” Gr. 5
103404 2 • WASHER, 5/16” Lock
14 100702 AR PLUG, Tube
15 125510 1 GATE, Solid full (ANSI)
125549 1 GATE, Solid full (CSA)
125554 1 GATE, Solid full (CE)
16 125577 1 PAD, Adhesive rubber foam
17 125687 - STOP ASSEMBLY, Additional gate (If equipped)
125686 1 • STOP, Additional gate
18 125526 1 STRIKE, Gate stop
19 125461 1 GATE, Half (ANSI)
125540 1 GATE, Half (CSA)
125544 1 GATE, Half (CE)