SJ 46A & SJ 46AJ
December 2007 Page 31
Section 2 - Operation Visual and Daily Maintenance Inspections
2.8-11 Rotary Actuator
Ensure there are no loose or missing parts -
and there is no visible damage.
Ensure all bolts and pins are properly -
tightened.
Ensure all hoses are properly tightened and -
there is no evidence of hydraulic leakage.
2.8-12 Jib (If Equipped)
Ensure there are no loose or missing parts -
and there is no visible damage.
Ensure all bolts and pins are properly -
tightened.
Ensure all hoses are properly tightened and -
there is no evidence of hydraulic leakage.
2.8-13 Boom
Ensure there are no loose or missing parts -
and there is no visible damage.
Ensure all bolts and pins are properly -
tightened.
Ensure there are no visible cracks in welds -
or structure and there are no signs of
deformation.
Ensure all hoses are properly tightened and -
there is no evidence of hydraulic leakage.
Cylinders•
Ensure all cylinders are properly secured -
and there is no evidence of leakage.
Wear Pads•
Ensure all bolts are tight, there is no -
visible damage to the wear pads and that
no parts are missing.
Hoses•
Ensure all hoses are properly tightened -
and there is no evidence of hydraulic
leakage.
Power Track•
Ensure there are no loose or missing -
parts and there is no visible damage.
Rotary Actuator
Jib
Main and Fly Booms
Riser
Power Track
Cylinders
Wear Pads
To Next Page
Loading...
