Flight Manual SL 200 Book 1
b) Engine area (2. 3. 4.) – check the following:
- Open the engine cover, check engine mounting condition and attachment of engine, engine screws and engine
mounting screws, shock absorbers condition
- The spiral springs condition on exhaust system and their security lock with binding wire; exhaust gas temperature
sensor condition and attachment of electric cables
- Electric installation cables condition
- Fuel hoses tightness and whole fuel installation tightness
- Carburetor attachment, check rubber packing, throttle bowdens, choke and turbo compressor servomotor
- The amount of engine oil in oil tank and close the tank
- The amount of cooling fl uid, cooling circuit tighteness, the level in overfl ow tank
- Bowden tip attachment and threaded joint on string clip of in-fl ight adjustable propeller control system, if in-fl ight
adjustable propeller is installed - Propeller inner screws tightness and the extension fl ange
- Propeller blades condition and propeller hub spinner attachment
- Pull-rods and end stops of directional control
- Engine cowling attachment (screw tightness) – close it and lock it
To Next Page
Loading...
