Skyrocket Chocolate Pen

To Next Page

Assemble & plug in.

ALKALINE BATTERY CAUTIONS

• Do not use rechargeable batteries.

• Non-rechargeable batteries are not to be recharged.

• Different types of batteries or new and old batteries are not to be mixed.

• Batteries are to be inserted using correct polarity.

• Remove exhausted batteries as soon as possible and discard properly.

• Remove all batteries from compartment if toy is not used for a long period.

• The supply terminals are not to be short-circuited.

• Never throw batteries in a fire or attempt to open the outer casing.

WARNING:

Batteries are harmful if swallowed. Please keep away from children.

Battery Disposal:

Dispose of batteries according to the local laws and regulations of your region. Some batteries

may be recycled, and may be accepted for disposal at your local recycling center. If you are not able to identify

the applicable rules in your area, please check the instructions of the battery manufacturer.

ADULT SUPERVISION REQUIRED

Stir Stick

Lid

Warmer

Tray

USB Cable

Plunger

Chocolate Pen

Confectionery Candy

Mold Trays

Pen Door

Cartridge

Retainer Ring

Conforms to product safety standards

ASTM F963. Not suitable for children

under 3 years due to small parts.

• Adult supervision & participation is required.

• Please retain all packaging & instructions for future reference.

They contain valuable product information.

• Remove all packaging before giving this product to a child.

• An adult should check toy to ensure there is no damage.

NOTE: If packaging or Confectionery Candy is damaged, please

do not use. Please contact customer service for replacement.

• 2 AAA Batteries

• 2 AMP USB Charging Block

• Small Phillips Head Screwdriver

• Large Bowl

• Wax or Parchment Paper

The Chocolate Pen™ requires adult assembly. To ensure

the best experience, it’s advisable to prep the pen before use.

Assemble the tools you’ll need to enjoy your Chocolate Pen™:

STOP: READ THIS BEFORE USING YOUR CHOCOLATE PEN.

CHOKING HAZARD-

Small parts.

Not for children under 3 years.

WARNING:

Batteries & ControlsBatteries & Controls

PreparationPreparationWant to Make More?Want to Make More?

Contains Milk and Soy.

• Unscrew battery cover using a Phillips head screwdriver (not included).

• Install 2 new “AAA” (LR03) UM4 alkaline batteries in the orientation shown.

• Replace battery cover and tighten screws to close.

IMPORTANT INFORMATION

•

Use Chocolate Pen™ as instructed.

•

Wash hands before use.

•

Wash all parts by hand thoroughly before use, refer to cleaning

information.

•

Do not let water touch the confectionery candy, as this will prevent

hardening.

•

Adult should supervise melting the confectionery candy and pen use.

•

Have adult check the temperature of water before melting

confectionery candy.

•

Do not heat confectionery candy in a microwave or an oven.

•

Do not heat any components in a microwave or an oven.

•

Melted candy may be HOT. Avoid contact with skin.

•

Avoid getting candy in eyes. Rinse eyes with

water and seek medical attention if necessary.

•

Candy might stain clothing, furniture, or

carpeting, please use with caution when using

the pen.

•

Store in cool dry place.

•

Store homemade pen “treats” in a sealed

container, or re-sealable plastic bag.

• Results will vary from product images depending

on age and skill level.

• Confectionery candy pouches inside not labeled

for retail sale.

• Toy parts made and assembled in China.

Questions or comments? Please email support@skyrockettoys.com

The information presented in these instructions are believed to be currently accurate and reliable; however no warranty, either express or implied, is made. Any

recommendations or suggestions are made without warranty or guarantee, since among other reasons, the conditions of storage and use are beyond our control.

respective logos are trademarks and/or registered trademarks of Skyrocket LLC. All other trademarks, logos and copyrights are the

property of their respective owners, and there is no relationship express or implied with Skyrocket LLC.

MADE IN CHINA

Place pouch of candy into

warm water. Knead until melted.

LED will light up and/or blink

as tray warms.

Open pouch and squeeze

melted candy into tray.

Add other colors and cover with

lid to keep melted.

WARNING:

Warmer should only be used with tray.

Never pour anything directly into warmer without tray.

Drawing Tip

USB charging block not included.

For best results, a 2 Amp block

is highly recommended.

Battery

Door

Fill

Gauge

Draw

Button

Draw

Mode

Fill

Mode

PRESS

To Draw

RELEASE

To Stop

#ChocolatePen

You may also purchase from

https://support.skyrocketon.com

Chocolate Pen Refill

may be purchased online

through your favorite retailers.

CLEAN THOROUGHLY

BEFORE AND AFTER USE

• DO NOT SUBMERGE PEN, OR WARMER IN WATER.

• Wash all parts with damp sponge and mild soap before use.

• Do not use harsh chemicals to clean pen.

• Do not wash in dishwasher.

• Non-electrical parts that are covered with hardened candy can be pre-soaked

with warm water to loosen candy before cleaning.

• Make sure pen and all components are completely dry before using.

Do NOT

microwave

confectionery

candy.

WARNING:

# 18193

FCC STATEMENT:

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna - Increase the

separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the

dealer or an experienced radio/TV technician for help.

Stir and gently tap side of tray

to remove air bubbles.

FOR A HOW-TO VIDEO

please visit:

www.chocolate-pen.com

18193-US-G4

Need help?

Do you have a question about the Skyrocket Chocolate Pen and is the answer not in the manual?

Summary

STOP: READ THIS BEFORE USING YOUR CHOCOLATE PEN

Assembly and Preparation Notes

Details required tools like batteries, USB block, screwdriver, bowl, and paper for assembly and use.

Safety & Compliance Warnings

Warns about small parts, choking hazard for children under 3, and lists milk/soy ingredients.

Batteries & Controls

Battery Installation & Type

Instructions for installing 2 new "AAA" alkaline batteries and cautions against rechargeable types.

Battery Safety Precautions

Lists crucial cautions for battery handling, including not recharging, mixing types, short-circuiting, and ingestion.

Want to Make More?

Purchasing Chocolate Pen Refills

Informs users where to purchase Chocolate Pen refills online through retailers or a specific support website.

IMPORTANT INFORMATION

General Usage Guidelines

Provides essential usage tips including hand washing, candy handling, adult supervision, and temperature checks.

Candy Handling & Storage Tips

Offers advice on preventing candy hardening, avoiding stains, and proper storage of treats.

CLEAN THOROUGHLY BEFORE AND AFTER USE

Pen & Warmer Cleaning Instructions

Details how to clean the pen and warmer, emphasizing not submerging them and using mild soap.

Preparation

Step-by-Step Usage Guide

Outlines the process of assembling, plugging in, warming the tray, and preparing the candy for use.

Assembly & Filling Pen

Pen Assembly Steps

Guides through assembling the pen components, including the plunger, cartridge, and retainer ring.

Filling the Pen with Candy

Details the process of filling the pen with melted candy using the auto-fill cycle and preventing air bubbles.

Molding & Drawing

Drawing Candy Shapes

Explains how to draw candy shapes using the pen, including detail work with a stir stick and optimal pen height.

Hardening and Peeling Candy

Covers placing designs in the refrigerator to harden and carefully peeling them off the paper.

Changing Colors or Removing Hardened Candy

Process for Changing Candy Colors

Describes how to drain old candy, clean parts, and refill the pen with a new color of confectionery candy.

Reheating Hardened Candy

Provides instructions on how to reheat hardened candy within the pen using warm water.

The Chocolate Pen is a creative device designed for children aged 6 and up, allowing them to draw and mold shapes using confectionery candy. It requires adult supervision for assembly and use, and comes with various components to facilitate the creative process.

Function Description:

The Chocolate Pen enables users to fill a pen-like device with melted confectionery candy and then dispense it to draw designs or fill molds. The device includes a warming tray to keep the candy melted, mold trays for creating specific shapes, and a stir stick for fine detailing. It operates in two modes: "Fill Mode" for loading candy into the pen and "Draw Mode" for dispensing it. The pen features a draw button to control candy flow and an auto-fill cycle for convenient loading. Once designs are created, they can be hardened in a refrigerator and then carefully peeled from the paper or molds. The device is designed to be user-friendly, with clear instructions for assembly, filling, drawing, and maintenance.

Important Technical Specifications:

Power Source: Requires 2 AAA (LR03) UM4 alkaline batteries for the pen.
Charging Block: USB charging block (not included) is required for the warming tray. A 2 Amp block is highly recommended for best results.
Candy Compatibility: Designed for use with specific confectionery candy pouches. The candy contains Milk and Soy.
Safety Standards: Conforms to product safety standards ASTM F963.
Age Recommendation: Suitable for children 6 years and older. Not suitable for children under 3 years due to small parts (choking hazard).
Temperature for Melting Candy: Candy pouches are placed in warm water at approximately 120°F (49°C) for melting.
Hardening Time: Candy will harden within approximately 10 minutes of removal from the tray.

Usage Features:

Assembly: Adult assembly is required. Components include a stir stick, lid, tray, warmer, USB cable, pen door, drawing tip, cartridge, retainer ring, plunger, confectionery candy, and mold trays.
Battery Installation: Unscrew the battery cover with a Phillips head screwdriver, install 2 AAA alkaline batteries with correct polarity, and replace the cover.
Warming Tray Setup: Assemble the warmer and plug it in. The LED will light up and/or blink as the tray warms.
Candy Melting: Place a pouch of candy into warm water (approx. 120°F) and knead until melted. Do NOT microwave confectionery candy or any components.
Filling the Pen:
- Open the candy pouch and squeeze melted candy into the tray.
- Slide the plunger into the pen, then the cartridge over the tip of the plunger.
- Cover with the pen door and lock with the retainer ring.
- In "Draw Mode," press the draw button until the plunger moves to the tip.
- Dip the pen into the melted candy in the tray.
- Push the switch up to start the auto-fill cycle. The pen will automatically "CLICK" off when full.
- Gently stir and tap the side of the tray while keeping the tip submerged to avoid sucking air.
- To ensure no air bubbles: point the pen upwards, tap gently against a table, and tap the draw button until all air is out and chocolate is visible.
- Wipe the tip clean with a damp cloth and snap on the drawing tip.
Drawing and Molding:
- Press the draw button to make candy flow from the pen.
- Use the pen to draw shapes on wax or parchment paper, holding the pen approximately 1/2 inch above the paper for best results.
- Use the stir stick for fine details.
- Fill mold trays with candy.
- Place designs in the refrigerator to harden.
- Carefully peel back paper after designs have hardened.
Changing Colors/Removing Hardened Candy:
- If candy hardens, the pen will stop working.
- To change colors, drain the current color back into the warming tray, disassemble the pen, wipe parts clean with a cloth, and refill with a new color.
- To remove hardened candy from the pen: Seal the pen cartridge into a locking bag and place it in warm water (approx. 120°F) for 1 minute. Remove from the bag, then use the stir stick to free the candy from the cartridge. Seal the candy back into the bag and follow the preparation steps for melting.

Maintenance Features:

Cleaning:
- Wash hands before use.
- Wash all parts by hand thoroughly before and after use with a damp sponge and mild soap.
- DO NOT SUBMERGE THE PEN OR WARMER IN WATER.
- Do not use harsh chemicals to clean the pen.
- Do not wash in a dishwasher.
- Non-electrical parts covered with hardened candy can be pre-soaked with warm water to loosen the candy before cleaning.
- Ensure the pen and all components are completely dry before using.
Storage: Store in a cool, dry place. Store homemade pen "treats" in a sealed container or re-sealable plastic bag.
Battery Disposal: Dispose of batteries according to local laws and regulations.
Troubleshooting: If packaging or confectionery candy is damaged, do not use and contact customer service for replacement.
Safety Precautions:
- Avoid getting candy in eyes; rinse with water and seek medical attention if necessary.
- Melted candy may be HOT; avoid contact with skin.
- Candy might stain clothing, furniture, or carpeting; use with caution.
- Do not heat confectionery candy or any components in a microwave or oven.
- Do not let water touch the confectionery candy, as this will prevent hardening.
- Adults should supervise candy melting and pen use, and check water temperature before melting candy.
- Retain all packaging and instructions for future reference as they contain valuable product information.
- Remove all packaging before giving the product to a child.
- An adult should check the toy to ensure there is no damage.