MANUAL SETTINGS
Note: If the radio-controlled clock has already successfully received the WWVB time
signal and displays the correct time and date, then the Manual settings can be skipped.
Pressing the SET key can enter the manual setting modes. The following settings can
now be programmed:
• Time zone setting
• DST ON/OFF
• Manual time setting (Hour, Minute)
• Year setting
• Month setting
• Date setting
• Weekday setting
• 12/24h time format display
• ºF/ºC temperature setting
TIME ZONE
The time zone can be set between the +/–12-hour range in LCD2. To do this:
1. The time zone (LCD2) will start flashing (Default setting "EST -5“). Select the desired
time zone by pressing and releasing the + key.
Time zone settings: -12, -11, -10, ALA, PST, MST, CST, EST, ATL, -3, -2, -1, 0, +1,
+2...+12. (Default: EST)
2. Press and release the SET key to enter the “DST Setting”.
DST (daylight saving time)
1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the +
key.
2. Press and release the SET key to manually set the time.
Note: The DST default is “ON”, meaning that the WWVB will automatically change the
time according to Daylight Saving Time in the spring and fall. For areas that do not
recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.
To Next Page
Loading...