Need help?Do you have a question about the Skyteam ST125-1 and is the answer not in the manual?
Guidance on installing accessories and safety tips to avoid operational issues.
Essential precautions for safe motorcycle operation and riding practices.
Details on the location of frame and engine serial numbers for registration and service.
Details on ignition keys, switch positions, and instrument panel indicators.
Operation of the dimmer switch and turn signal switch on the left handlebar.
Functions of horn, choke, clutch levers, and the start button.
Controls for engine speed, fuel supply, and tank access.
Operation of kick starter, rear brake pedal, and gearshift lever for transmission.
How to use the steering lock to secure the motorcycle.
Instructions for helmet holder use and recommendations for fuel and engine oil.
Detailed steps for the initial break-in period of the motorcycle.
Guidance on managing speed and engine load during the break-in period.
Comprehensive list of checks to perform before each ride for safety.
Advice for new riders, handling different conditions, and adhering to regulations.
Step-by-step instructions for starting the engine in various temperature conditions.
Techniques for starting from a stop and navigating inclines or declines.
Proper braking, parking, and the importance of routine maintenance checks.
Explanation of maintenance chart symbols and important notes for service procedures.
Identification of crucial parts requiring regular lubrication for optimal performance.
Guide to accessing the battery and monitoring its charging status.
Detailed instructions for cleaning the air cleaner filter assembly for engine efficiency.
Procedures for spark plug maintenance, including cleaning and replacement.
Steps for changing transmission oil and basic carburetor information.
Steps to adjust the engine's idle speed for proper operation.
Adjusting the throttle cable and inspecting the drive chain for wear and tension.
Methods for adjusting drive chain slack and cleaning the chain and sprockets.
Warnings and checks for the front brake fluid and hydraulic system.
How to check brake lining wear and perform front brake system inspections.
Procedure for adjusting the rear brake pedal freeplay and verifying brake function.
Checking rear brake shoe wear limits and when replacement is needed.
Maintaining correct tire pressure and checking tread depth for safe riding.
Warnings regarding incorrect tire types and the importance of proper inflation.
A guide to diagnosing and resolving issues preventing the engine from starting.
General| Engine Type | Air-cooled, 4-stroke |
|---|---|
| Cooling | Air-cooled |
| Displacement | 125cc |
| Bore x Stroke | 56.5 mm x 49.5 mm |
| Fuel System | Carburetor |
| Ignition | CDI |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Front Tire | 2.75-18 |
| Engine | 4-stroke, single cylinder |
| Transmission | 5-speed |
| Frame | Steel |
| Rear Suspension | Twin shock absorbers |
| Wheelbase | 1280 mm |
To Next Page