Skytec SPJ Series - Input Panel

About the enclosure
The enclosure and baffle of this range of speakers are made of polypropylene co-polymer. The use of copolymer
allows features such as stand mounting sockets, handholds, ports and high frequency horns to be molded
directly into the cabinet. Not only do you get contemporary appearance, you also get lots of functionality.
INPUT PANEL
10” Versie:
1. Input connector for microphone
2. Volume control for the microphone
3. Volume control for the line input
4. Line input connector for the audio input source e.g. mixer, CD player, etc.
5. Output connector to a second box or amplifier (line level)
6. Tone control for the output
12” & 15” Versie:
1. Input connector for microphones
2. Volume control for the microphone
3. Volume control for the line input
4. Volume control for the output
5. Tone control for the output
6. Output connector to a second box or amplifier (line level)
7. Line input connector for the audio input source e.g. mixer, CD
player, etc.
MP3 PANEL
A. DISPLAY
Shows MP3 information
B. STOP
Track stop playing
C. PLAY/PAUSE
Track play or pause mode
D. PREV
Play previous track
E. NEXT
Play next track
F. USB/SD SWITCH
Use switch for playing from USB stick or SD card