EasyManua.ls Logo

Skytrac ISAT-100 User Manual

Default Icon
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ISAT-100 Specifications, Operating Instructions
and Install Manual
ISAT-100-OPD-SOI
Applies to P/N: ISAT-100
Applies to Mod Status: AB
Document Revision: 02.010
April 9, 2013
SkyTrac Systems Ltd.
200-170 Rutland Road N
Kelowna, BC Canada
V1X 3B2
Tel. (250) 765-2393
Fax (250) 765-3767
Web: www.skytrac.ca
Email: techsupport@skytrac.ca
Copyright © 2013 SkyTrac Systems Ltd.
All rights reserved.
The document reference is online, please check the correspondence between the online documentation and the printed version.
Question and Answer IconNeed help?

Do you have a question about the Skytrac ISAT-100 and is the answer not in the manual?

Skytrac ISAT-100 Specifications

General IconGeneral
CategorySatellite Phone
Satellite ServiceIridium
Two-Way MessagingYes
SOS AlertingYes
GPS TrackingYes
Operating Temperature-20°C to 55°C

Summary

SPECIFICATIONS

AIRWORTHINESS LIMITATIONS

Installation Limitations

Specifies mandatory installation regulations for the ISAT-100 unit.

Operation Limitations

States limitations on GPS information usage and installation orientation.

INSTALLATION INSTRUCTIONS

Installation Requirements

Defines installer qualifications and adherence to FAA advisory circulars.

ISAT-100 Unit Mounting

Details how to secure the ISAT-100 unit to the airframe using mounting rails.

Antenna Installation Procedures

Provides guidelines for installing the active L1 GPS Passive Iridium Antenna.

Audio Installation Guide

Covers audio installation cautions, level adjustment, impedance, and MIC DC BIAS selection.

MIC LEVEL Adjustment

Details adjusting microphone input amplifier gain to avoid signal clipping.

Post Installation Testing

Outlines initial verification, configuration, and EMI testing procedures.

OPERATING INSTRUCTIONS

MAINTENANCE AND CONTINUED AIRWORTHINESS

Continued Airworthiness

Addresses battery replacement, periodic inspections, and general maintenance requirements.