SkyVac MIGHTY ATOM - MAINTENANCE AND TROUBLESHOOTING; TOP TIPS FOR WET & DRY VACUUM CONDITION; TROUBLESHOOTING COMMON ISSUES

11
SYMPTOM POTENTIAL CAUSE REMEDY
Loss of Sucon Blocked lter, or full bin Clean lter and empty bin
Loss of Sucon
Blockages in exi neck, or
poles, or vac entrance
Clear blockages
Loss of Sucon
Leaves blocking at
end tool
Tap leaves & end tool on
roof les
Loss of Sucon Blocked exi neck
Place end tool on the roof and gently
pull down, to slightly straighten exi
bend, in order to unblock
Loss of Sucon
Damp debris build up,
inside exi hose of tubes
Suck water from the bucket.
Machine stopped working Loss of power Check power supply
Machine stopped working
Too many, or incorrect extension
leads
Always use heavy duty extension leads
TOP TIPS TO KEEP YOUR SKYVAC® MIGHTY ATOM
WET & DRY VACUUM IN THE BEST CONDITION.
1. Start each new project with a CLEAN and DRY Filter.
2. Build your poles up to the required height resng against the side of a
building—do not assemble on the ground and then try to li up.
3. Have a clean bucket of water on standby! To help clear through blockages
during guer clearance projects.
4. At the end of each task, rinse the system through. Drop the poles into a
bucket of clean water and let in run through the poles, hose and Vacuum.
5. Give poles and end tools a thorough clean to ensure they are clean and
free from dirt paying aenon to the joins.