EasyManuals Logo

Skywalk RANGE X-ALPS Manual/Service

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
46 47
EN
CAUTION
BEFORE EVERY LAUNCH, CONNECT THE RESERVE PARACHUTE TO THE
HARNESS BY HOOKING THE ENDS OF THE TWO V-BRIDLE LINES INTO THE
MAIN CARABINER ON EACH SIDE.
SET-UP AND ADJUSTMENTS
The RANGE X-ALPS is available in sizes SM and L and should be set up and adjusted ex-
actly to match your needs. Before your first flight, you should carry out the set-up in a
sitting position with the harness hanging in a simulator.
The individual adjustments depend on the shape of your body, your personal preferences,
and your flying style. Finer adjustments can be made gradually after a few flights.
Naturally the reserve parachute must be installed
before making the adjustments.
Step into the harness to the left and right of the leg
straps (get up) and pull it up like a pair of trousers.
Make sure that you don’t step through any of the
lines. The use of buckles was avoided on purpose
to reduce weight. We recommend that you practice
putting on your harness on the ground before your
first flight.
SAFETY NOTE
IF YOU LAND IN A TREE, IN WATER, OR
NEED TO BE RESCUED FROM DIFFICULT
TERRAIN, THE CHEST STRAP CAN BE OPE-
NED BY OPENING THE CARABINER.
In the next step, guide the splints through the loops in the respective grommet. Ensure that
the longer splint points to the middle of the container and that it properly seals both flaps.
Now fasten the second splint and close the upper and lower ends of the outer
flaps using the Velcro.

Other manuals for Skywalk RANGE X-ALPS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skywalk RANGE X-ALPS and is the answer not in the manual?

Skywalk RANGE X-ALPS Specifications

General IconGeneral
BrandSkywalk
ModelRANGE X-ALPS
CategoryAccessories
LanguageEnglish

Related product manuals