11
CHARGING YOUR Sky Walker
Remove your Sky Walker from its packaging and place it on a steady surface for charging.
Ensure that the charging port of the Sky Walker is clean and dry. Make sure that there is no dust,
debris or dirt inside the charging port. See Product Diagram for charging port location.
Use the included Sky Walker wall-charger and connect the Sky Walker to a suitable power point.
Use the appropriate cable provided for your region. NB: Using a non-provided cable will void
your manufacturer warranty and may cause serious product failure.
The indicator light on the SKY WALKER charger should change to RED, indicating that your Sky
Walker is now charging.
When the RED indicator light on your Sky Walker charger turns to GREEN, your Sky Walker is fully
charged.
For first-time use, please charge for approximately 2 hours as your Sky Walker has been
manufactured with some residual power stored.
When you go to next charge your Sky Walker from flat, a full charge will take approximately 3
hours. DO NOT leave unattended or over-charge the battery for more than 3 hours.
To Next Page
Loading...
