EasyManua.ls Logo

Skywalker SWTCS15 - Page 19

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Use a ladder for this step! Now, fully tighten the straps on each of the arched enclosure poles.
Be careful not to pull too tight or you could rip the foam!
STEP 24
STEP 23
Make sure the indented sides of the straight tubes are against the trampoline frame. Using a couple people
(because the poles are pretty heavy!), grab either side of an enclosure arch. Lift the poles at the same time
and place the end of the lower tubes into the T-sockets. Push the poles all the way down into the sockets.
Repeat this step to install the remaining three arches.
Side with indent

Related product manuals