Name: Skywell 5T1.5
Brand: Skywell
Rating: 5 (1 reviews)

Questions and Answers:

R
Robert SolisAug 3, 2025
Why is there no cold water coming from my Skywell 5T1.5?
- I
  ikruegerAug 3, 2025
  Several factors could cause this. First, ensure the unit is plugged into a working outlet and the power switch is on. Low water levels can also prevent cold water dispensing; allow the machine time to generate more water, or add clean water to the collection tank. If the unit was recently plugged in or emptied, the water may need more time to cool. If the problem persists after an hour of continuous operation, check if the condenser coils (black tubing at the back) are radiating heat. If not, it may indicate a compressor cooling system issue.
D
davidgravesAug 11, 2025
Why is there no hot water coming from my Skywell 5T1.5 Water Dispenser?
- Z
  zskinnerAug 11, 2025
  There are a few potential reasons why your Skywell Water Dispenser isn't dispensing hot water. First, check that the dispenser is properly plugged into a functioning power outlet and that the power switch is turned on. Also, make sure that the water level isn't too low. If it is, allow the machine to generate more water, or you can speed up the process by adding clean water to the collection tank. If adding water doesn't solve the issue, give the machine 30 minutes to try pumping water into the hot tank. If there's still no hot water after this, it may require professional servicing.
L
lisa39Aug 18, 2025
What to do if my Skywell Water Dispenser is leaking?
- J
  Jasmine YoungAug 18, 2025
  If you notice your Skywell Water Dispenser leaking, start by checking the collection tank lid to ensure it's correctly aligned and firmly in place. Next, make sure the water filters are properly seated in the filter manifold. If you can, open the cabinet door at the front of the unit to inspect for drips, which could indicate a cracked water line. If you find a cracked line that can be replaced, do so.