-3-
Technical Specification
1. Application Area:
This product standard is use for LED chassis.
2. Specification:
All the standard are measured under following conditions without other specification.
2.1 Ambient Temperature: 20+/-5℃
2.2 Relative Humidity: 65+-10％
2.3 Power Supply Voltage: 12VDC
2.4 Adjust after 20 minutes warm-up.
3. Test and check method:
3.1 Capability: According to nation test standard
3.2 Safety: IEC60065
3.3 EMC: standard
standard
To Next Page
