Need help?Do you have a question about the SkyZone SKY04X V2 and is the answer not in the manual?
Select battery type for accurate capacity display.
Adjust voltage reading using a multimeter.
Calibrate receiver signal strength indicator.
Upgrade DVR firmware using an SD card.
Steps to update goggles firmware via computer.
Select battery type for accurate capacity display.
Adjust voltage reading using a multimeter.
Calibrate receiver signal strength indicator.
Upgrade DVR firmware using an SD card.
Steps to update goggles firmware via computer.
General| Display Type | OLED |
|---|---|
| Resolution | 1280x960 |
| Interpupillary Distance | 58-71mm |
| Aspect Ratio | 4:3/16:9 switchable |
| Built-in DVR | Yes |
| Weight | 267g |
| Language | English, Chinese |
| Display | OLED |
| Refresh Rate | 60Hz |
| Diversity Receiver | Yes |
| HDMI Input | Yes |
| AV Input | Yes |
| Power Supply | DC7-25.2V |
| Dimensions | 185*75*67mm |
| Input Voltage | 7-25.2V (2-6S LiPo) |
| Battery | 2~6S Lipo |
To Next Page
