1) Wire and connect power - Refer to step 3 in the main quick guide for information
on pins and serial connections
2) Wait 5 Minutes for LEDs 1-3 to go Green - Whilst your DualCom Pro 2 downloads
its configuration
3) You’re good to go! - For customisation use the CSL My Base App/Web Portal. For
panel configuration instructions see our online guides
Need a My Base Account?
CLICK HERE TO REGISTER
Need One Time My Base Access?
CLICK HERE
Need Panel Configuration Instructions?
CLICK HERE TO FIND YOUR PANEL
Need UDL Configuration & Install Instructions?
CLICK HERE TO FIND YOUR UDL GUIDE
To Next Page
Loading...