EasyManua.ls Logo

Slackers Ninja Ladder - Inspection and Load Stress Test; Mandatory Load Stress Test

Slackers Ninja Ladder
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
4. INSPECTION AND MANDATORY LOAD STRESS TEST
Before anyone uses the NINJA LADDER, you must:
Step 1
• Keep your course clear - Bystanders should maintain a safe distance from the ladder of
at least 10 ft. (3 m) to prevent impacts by person’s jumping down. If you are unsure about your health for
using your NINJA LADDER please consult with your doctor before attempting
Step 2
• Inspect your equipment- Carefully examine your NINJA LADDER for any signs of wear, damage or
deterioration. Replace only with genuine b4Adventure parts. Call 1-844-834-4334
Step 3
• MANDATORY LOAD STRESS TEST- Suspend 350 LBS (159kg) from your ladder by attaching weights
or have two people (who weigh 350 LBS together) grip the rope and gradually suspend their weight on
the rope until both of their feet are off the ground. CAUTION: If at any time during the testing, if you hear
or see and signs of weakness (cracking sounds, fraying etc.) stop your test, you must select either a
different location or replace damaged parts.
WARNING! ADULT
STRESS OR LOAD TEST
REQUIRED BEFORE
USING - This product
should be tested using a
350 lbs (159 kg)
weight/load
350 lbs
159 kg
b4 Adventure • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS? info@b4Adventure.com •
www.b4adventure.com - DC:111919

Related product manuals