b4Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
info@b4Adventure.com · www.b4adventure.com 303-339-0482 - DC:080818
2
1. TREE SELECTION
• Tree should be healthy and have a minimum trunk diameter of 12 in (30 cm) and a maximum diameter of
28 in (71 cm).
• If installing on a branch (for bouldering) branch should also be live and healthy with a minimum
diameter of 10 in (25 cm).
2. ATTACHING THE CLIMBING HOLDS TO THE BASES
• There are 4 climbing holds and 6 bases. the 2 bases without climbing olds should be placed at the
bottom of the tree to be used as foot holds.
• Feed the strap through the spaces on each side of the base prior to attaching the holds.
• Use the black bolt to attach the hold to the base. Use the included Allen wrench to tighten.
Example of attaching holds
up the tree trunk
Example of attaching holds
onto branch for bouldering
Use as access to Ninjaline
(Sold Separately)
To Next Page
Loading...
