b4Adventure 4010 Holly Street Unit 16 • Denver Colorado 80216 • 1-844-834-4334 QUESTIONS?
info@b4Adventure.com · www.b4adventure.com 303-339-0482 - DC:080818
3
3. SETTING UP TREE CLIMBERS
• TIP: Space the bases out or put them closer together depending on the height of user.
• Have another person hold the base where you want it (Figure 1)
• Insert the end of the strap on the outside of the bend in of the ratchet and feed through the slot in the
ratchet (Figure 2).
• Pull the line through until the ratchet is against the tree (Figure 3)
• Tighten ratchet until the strap is tight against the tree and the base does not move (Figure 4).
4. MAINTENANCE OF YOUR TREE CLIMBERS
AT THE BEGINNING OF EACH PLAY SEASON:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked
or missing.
• Check all metal parts for rust. If found, sand and repaint using a non-lead based paint meeting the
requirements of 16CFR 1303. Lubricate all metallic moving parts per manufacturer’s instructions
ONCE A MONTH DURING PLAY SEASON:
• Check all moving parts including disks, ropes, cables, and chains for wear, rust, or other deterioration.
Replace as needed
• At the end of each play season or when temperature drops below 32° F (0° C), take down your Tree
Climbers and store indoors in a cool, dry location.
Figure 1
Figure 2
Figure 3
Figure 4
To Next Page
Loading...
