Step 6: on the router, you will find the SLAMWARE Core has been connected to the
WIFI successfully.
Note：AP mode is still functional when in Station mode.
Update the Slamware SDP
Slamtec will provide a regular update for the Slamware SDP firmware. We can manage
the Slamware SDP firmware easily via the backend admin of SDP.
Download the Slamware SDP firmware
We can download the update package of Slamware SDP from the address below:
http://www.slamtec.com/zh-CN/slamware/index/24 (Only in Chinese)
Update the Slamware SDP firmware via Web portal
Step 1: Connect to the wifi of Slamtec SDP
Step 2: Log into the Slamware SDP backend admin
Open browser and type http://192.168.11.1 in the address bar to log in.
Step 3: Go to the Upgrade Firmware page
After logging in, click Status to go to the Firmware list page and click Update Firmware.
To Next Page
Loading...