Table 6 - Recommended separation distances between portable and mobile RF communication
equipment and the SLENDERTONE CONNECT ABS containing Bluetooth
®
Radio Module.
The
SLENDERTONE CONNECT ABS containing a Bluetooth
®
Radio Module is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the SLENDERTONE CONNECT ABS containing a
Bluetooth
®
Radio Module can help prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the
SLENDERTONE CONNECT ABS containing a Bluetooth
®
Radio
Module as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 KHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
d = 1.17 √ P d = 1.17 √ P d = 2.33 √ P
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.75
1 1.17 1.17 2.33
10 3.70 3.70 7.36
100 11.70 11.70 23.50
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m)
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (w) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
English
EU Only
• Wireless communication equipment such as wireless home network devices, mobile phones (other than your own),
cordless telephones, base stations and walkie-talkies of between 1W to 10W can affect this equipment and should
be kept a distance of least 2.3 to 7.3 metres away from the device.
24 25
To Next Page
Loading...
