Need help?Do you have a question about the Sliger CERBERUS and is the answer not in the manual?
General| Expansion Slots | 4 |
|---|---|
| Material | Aluminum |
| Drive Bays | 2 x 3.5", 3 x 2.5" |
| Cooling Support | Up to 2x 120mm fans |
| GPU Support | Up to 325mm in length |
| Power Supply Support | SFX, SFX-L |
| Front I/O Ports | 2 x USB 3.0, 1 x Audio/Mic |
| Case Type | Mini-ITX, Micro-ATX |
Attaching motherboard with 9x M3 x 6mm PAN HEAD screws.
Mounting two 2.5" HDDs or SSDs using M3 x 5mm FLAT HEAD screws.
Mounting SSDs on front side using Window SSD Bracket with 2x M3 x 5mm FLAT HEAD screws.
Mounting ATX PSU with ATX Plate using 4x 6-32 HEX HEAD and 4x M3 PAN HEAD screws.
Mounting SFX PSU with SFX Plate using 6x 6-32 HEX HEAD and 4x M3 PAN HEAD screws.
Securing PCIe cards and slot covers with M3 x 6mm PAN HEAD screws.
Mounting a 240mm radiator with 25mm fans, hoses positioned at the front.
To Next Page