Sliger CERBERUS - ATX AND SFX POWER SUPPLY KITS; ATX Plate Kit Installation; SFX Plate Kit Installation

ATX/SFX PLATE KITS
The ATX PLATE KIT is for mounting full-sized ATX form factor power
supplies on the rear opening.
The SFX PLATE KIT is for mounting SFX form factor power supplies
on the rear opening.
The ATX power supply
attaches to the ATX Plate
with 4x
6-32 x 1/4” HEX
HEAD and the ATX plate
attaches to the chassis
with 4x M3 x 6mm PAN
HEAD screws.
The SFX power supply
attaches to the SFX Plate
with 6x
6-32 x 1/4” HEX
HEAD and the SFX plate
attaches to the chassis
with 4x M3 x 6mm PAN
HEAD screws.