SLIK U 8000 User Manual

7661E-2
U 8000
Operating Instructions
Congratulations on the purchase of a SLIK U 8000 Tripod.
SLIK Corporation has designed your tripod to be a sturdy, rugged,
dependable product that will provide you with many years of satisfac-
tory use.
Please take a few moments to read this instruction sheet carefully so
you can take full advantage of your Tripod's many fine features.
Retain this instruction sheet in case you might want to refer back to it.
Caution
This caution icon refers to information pertaining to important safety
procedures in preventing injuries, and damages which may occur as
a result of mishandling this product.
Prohibited
This prohibited icon refers to information pertaining to prohibited con-
tents. Please refer to instructions closely to avoid accidents.
Specification
Length folded 590mm
(23 1/4")
Max. operating height 1,500mm
(59 1/12")
Max. center column ext. 300mm
(11 5/6")
Weight 1.5kg
(3 lbs 5 oz)
R
This product has been designed
to handle equipment weighing
under 2 kgs (4 lbs 6 oz).
Do not overload.
Some equipment weighing under
2 kgs (4 lbs 6 oz), such as long
lenses, may not balance well due
to its weight distribution. In such
case, please use a larger tripod.
Equipment that can be
used with this tripod
Carrying the tripod
Carrying a tripod with a camera
left on can result in unexpected
accidents.
We therefore, recommend you to
remove your camera while carrying
the tripod.
Prohibited
Attaching camera to the Quick release platform
To remove the Quick release platform
from the Pan head, turn Quick
release lock lever counterclockwise,
and lift Platform out at an angle from
the side closest to the lever.
The retractable Camera position-
ing pin enables you to mount
either a video, or a still camera on
to the Quick release platform.
For still cameras, align the length of
the Platform along the baseplate of
the camera body, and tighten screw
into the tripod socket with a coin.
For video cameras, match the
Camera positioning pin of the
Platform to the corresponding hole
beneath the camera, and then tighten
screw into tripod socket with a coin.
Replacement Quick release platform
for the U 8000 is available. Cat. No.
618-731
Return Quick release platform back
onto the Pan head by inserting at
an angle from the side closest to
the Quick release lock lever.
Quick release platform
Pan & Tilt handle
Retractable
camera positioning pin
Camera post
Quick release
platform
Panning lock knob
Quick release
lock lever
Vertical tilt knob
Center column
Pan head
Leg lock
Components
Elevation
crank handle
Rubber leg tip
Leg brace
Center column
locking collar
Center column
cover
Center column
ring
Leg lock lever
Caution
Prohibited

SLIK U 8000 Specifications

General

Brand	SLIK
Model	U 8000
Category	Camera Accessories
Language	English

Summary

Tripod Components Overview

Pan head

Describes the main pan head assembly of the tripod for camera movement control.

Center column

Details the center column, including its locking collar and cover for height adjustment.

Elevation crank handle

Explains the function of the elevation crank handle for raising/lowering the center column.

Leg lock mechanism

Details the leg lock mechanism for securing tripod legs at the desired length.

Rubber leg tip

Describes the rubber tip at the end of the tripod leg for stability.

Leg brace

Details the leg brace that connects the tripod legs for added stability.

Quick release platform

Explains the quick release platform for attaching and detaching cameras easily.

Vertical tilt knob

Details the knob used to control the vertical tilt movement of the camera.

Pan & Tilt handle

Explains the combined handle for controlling pan and tilt movements of the camera.

Retractable camera positioning pin

Details the retractable pin that helps align cameras on the quick release platform.

Camera post

Explains the camera post on the head where the quick release platform attaches.

Quick release lock lever

Details the lever used to secure or release the quick release platform.

Panning lock knob

Explains the knob used to lock the panning movement of the tripod head.

Equipment Load Capacity and Warnings

Safety Precautions

Highlights safety procedures to prevent injuries and product damage from mishandling.

Prohibited Actions

Indicates prohibited contents or actions to avoid accidents.

Load Limit Description

Specifies the product's weight limit and advises on potential balancing issues.

Carrying the tripod

Recommends removing the camera when carrying the tripod to prevent accidents.

Attaching and Detaching Cameras

Removing the Quick Release Platform

Instructions on how to remove the quick release platform from the pan head.

Camera Positioning Pin Usage

Explains how the retractable pin aids in mounting video or still cameras.

Attaching Still Cameras

Guides on aligning and tightening the platform for still cameras using the screw.

Attaching Video Cameras

Explains how to align the positioning pin for video cameras.

Returning the Quick Release Platform

Instructions on reattaching the quick release platform to the pan head.

Operating the 3-Way Pan Head

3-Way Pan Head Movements

Details how to control camera movements using the pan handle and knobs.

Vertical Tilt Adjustment

Explains how to adjust the vertical tilt of the camera using the dedicated knob.

Panning Adjustment

Describes how to control and lock the left/right panning movement of the camera.

Tripod Leg Operations

Extending the tripod legs

Instructions on extending or shortening individual leg sections using the lock lever.

Opening and Closing Tripod Legs

Guides on how to open the tripod by tilting on one leg and close it.

Center Column Operations

Elevating the center column

Instructions on how to raise or lower the center column using the crank handle.

Adjusting elevation tension

Explains how to adjust the tension of the center column movement using a tension tube.

Tripod Care and Maintenance

Cleaning Instructions

Recommends cleaning with mild detergent and a soft cloth, avoiding grease or oil.

Environmental Precautions

Advises against using the tripod near flames or extreme heat.