Slim Tread Treadmill - Assembly Instructions; Handrail Assembly Guide

Product size
57” x 26” x 3.5”
Running Belt size
48” x 18.5”
Ground Clearance
1.8” ≦Slim Tread™≦3.5”
MAX Power
350W
MAX Speed
*Actual speed varies with users weight
ASSEMBLY INSTRUCTIONS:
Slim Tread™ is completely assembled. Plug it in and start to use it immediately.
Assembly instructions for users who buy handrail separately only


Assembly Instructions for handrail:
1.Put Slim Tread™ face down and make sure there are no sharp items or debris on the floor to avoid scratches on the surface of Slim                         
Tread™.
2.Put handrail down to overlap both sides of Slim Tread™, make sure the holes are aligned.
3.Lock unsupported handrail in both sides with screws. 8 screws in total.
4.Lock supported parts on both sides with screws. Set it up.
5.Overlap the holes of the long support part (the part which stretches across the running belt).
6.Put Slim Tread™ face up. Plug in and start enjoying the Slim Tread™.
USE INSTRUCTIONS