The Slime Tire Top Off is a portable tire inflator with an integrated LED light, designed for convenient tire maintenance and emergency use. This device is specifically engineered to inflate tires and various inflatables, offering a compact and user-friendly solution for maintaining proper air pressure.
Function Description:
The primary function of the Slime Tire Top Off is to inflate tires and other inflatable items. It operates by connecting to a vehicle's 12V power outlet, drawing power to run an internal compressor that delivers pressurized air through an air hose. The built-in gauge allows users to monitor the inflation process and ensure the desired pressure is reached. The integrated LED light provides illumination for night-time emergencies or use in poorly lit conditions, enhancing safety and convenience. The device comes with adapters for inflating balls and other inflatables, expanding its utility beyond just tires.
Important Technical Specifications:
- Power Source: Plugs into a 12V power outlet. It requires a 12V DC power outlet rated 15 amps or higher. It is not compatible with older 8 amp cigarette lighter receptacles.
- Maximum Continuous Use: The inflator should not be used continuously for more than 14 minutes. After 14 minutes of continuous operation, the unit requires a cool-down period of approximately 35 minutes to prevent overheating.
- Gauge: Features a built-in pressure gauge with readings in both bar and psi.
- LED Light: Equipped with a bright LED for night-time emergencies.
- Fuse: Contains a fuse located in the plug adapter, which may need to be inspected and replaced if the unit fails to turn on. The replacement fuse should be of the same size and amperage.
Usage Features:
- Easy Connection: The air hose connector screws directly onto the tire's valve stem, ensuring a secure connection for inflation.
- Simple Operation: An ON/OFF switch controls the inflation process. Users simply plug the power cord into the 12V accessory power outlet, screw on the air hose connector, and press the switch to begin inflation.
- Versatility: Includes adapters for inflating balls and various other inflatables, making it a multi-purpose tool.
- Built-in Gauge: The integrated gauge allows for real-time monitoring of tire pressure during inflation, helping users achieve the manufacturer's recommended air pressure.
- Safety Precautions:
- Always place the inflator on a hard, clean surface during operation to prevent overheating and ensure proper ventilation.
- Do not hold the inflator in hand while operating, as it can become hot.
- Do not run the vehicle while the inflator is operating; ensure the emergency brake is set and the car is in park. The vehicle may need to be in "accessory" or "on" position for the power outlet to function.
- Never block the inflator's input or output during operation.
- Always use a separate pressure gauge to double-check tire pressure and avoid overinflation.
- Keep the inflator out of reach of children.
- When inflating soft inflatables, be careful not to exceed their capacity, as they may not have recommended pressure markings.
- Troubleshooting: The manual provides guidance for common issues:
- Inflator does not turn on: Check the fuse in the plug adapter, the vehicle's power outlet fuse (must be 15 amps or higher), and ensure the receptacle and plug terminals are clean and free of debris. Firmly push and twist the power plug into the receptacle.
- Inflator runs but does not inflate: Verify the air hose connector is tightly screwed onto the valve stem and check for leaks in the tire or hose.
- Inflator runs slowly: This could indicate overheating (requiring a 35-minute cool-down) or low voltage from the vehicle's battery.
- Totally deflated tires: If a tire is completely flat, it might separate from the rim, causing air to leak. In such cases, it may be necessary to jack up the tire before inflation.
Maintenance Features:
- Fuse Replacement: The device is designed with an accessible fuse in the plug adapter, allowing for easy inspection and replacement if it blows. Users can unscrew the tip of the plug adapter to access the fuse.
- Cool-down Period: The instruction to allow a 35-minute cool-down period after 14 minutes of continuous use is a key maintenance guideline to prevent damage from overheating and prolong the life of the unit.
- Cleaning: Users are advised to keep the receptacle and plug terminals clean, especially from dirt like tobacco, to ensure proper electrical contact. A non-conductive probe should be used for cleaning.
- Storage: While not explicitly detailed, the compact design suggests easy storage within a vehicle.
The Slime Tire Top Off is a practical and essential tool for vehicle owners, offering reliability and convenience for maintaining optimal tire pressure and handling minor inflation needs. Its robust design and clear instructions aim to provide a safe and effective user experience.
Need help?
General
To Next Page
