EasyManua.ls Logo

Slime 40065 - User Manual

Slime 40065
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PART# 40065 | REV120519ART
HOME 120V / AUTO 12V
DDUAL UAL PPOWER OWER AALL LL PPURPOSE URPOSE IINFLATORNFLATOR
ATTENTION! READ ALL INSTRUCTIONS CAREFULLY
FAILURE TO FOLLOW WARNING INSTRUCTIONS CAN RESULT IN FIRE,
PERSONAL INJURY OR PROPERTY DAMAGE.
!
DIAL GAUGE
• Shock-resistant housing
• 0–100 PSI range
HIGH
PRESSURE
AIR HOSE
MOUNTING
BRACKETS
• Mounting screws and
anchors included
HIGH VOLUME
AIR HOSE
• Storage on
the bottom
POWER SOURCE
• 120V or 12V automatically
detected by inflator
AIR HOSE
STORAGE
AIR ACCESSORIES
AIR SWITCH
• Toggle between high
pressure or high volume
AIR ADAPTER
STORAGE
• Inflatables adapters
snap-in-place for
easy access
AUTO (12V)
CORD STORAGE
HOME (120V)
CORD STORAGE

Table of Contents

Questions and Answers

  • O
    osbornemorganJul 28, 2025
    What to do if my Slime 40065 Power Tool inflator does not turn on?
    • J
      jennifertuckerJul 28, 2025
      If your Slime Power Tool inflator isn't turning on, first ensure the power plug is firmly pushed into the receptacle, twisting it back and forth. Then, inspect the receptacle and plug terminals for any dirt or debris, using a non-conductive probe. Also, check your vehicle's power outlet fuse, ensuring it's at least 15 amps. Finally, inspect the fuse located in the plug adapter or inside the 120v cord storage, and replace it if necessary with the correct type (15a 250v 5mm x 20mm for 12V, or 2a 250v 5mm x 20mm for 120V).
  • M
    matthew18Aug 8, 2025
    What to do if Slime Power Tool inflator runs but does not inflate?
    • J
      Justin OsborneAug 8, 2025
      If your Slime Power Tool inflator runs but doesn't inflate, make sure the air hose connector is fully secured on the tire valve. Also, check the tire for leaks, inspect the hose for breaks and leaks at the fittings, and examine the valve core for any damage.
  • C
    Casey GarciaAug 18, 2025
    Why does my Slime Power Tool inflator run slowly?
    • P
      Paige DavisAug 18, 2025
      If your Slime Power Tool inflator runs slowly, it may have overheated from excessive use. Turn it off and allow it to cool for 25 minutes. Also, the voltage may be too low, so check the condition of your vehicle's battery.

Summary

Tech Specs

Wall Mounting and Storage Instructions

Inflate Tires

Inflate Rafts and Mattresses

Troubleshooting

Inflator Does Not Turn On

Steps to diagnose and fix when the inflator fails to power on.

Inflator Runs But Does Not Inflate

Checks for issues preventing inflation, such as hose leaks or valve damage.

Inflator Runs Slowly

Reasons for slow operation, including overheating or low voltage.

Slime 40065 Specifications

General IconGeneral
BrandSlime
Model40065
CategoryPower Tool
LanguageEnglish

Related product manuals