INFLATE TIRES
1. Securely screw air hose valve connector onto the valve stem.
2. Plug power cord into 120 volt wall power outlet or 12 volt accessory power outlet.
3. Flip the toggle switch up to power the inflator for high pressure inflation. Inflate
tire to manufacturer's recommended air pressure*. When proper pressure is
reached, toggle switch to middle position to turn off inflator. Unplug power cord
and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's
side door jamb.
1
3
2
To Next Page
Loading...
