EasyManua.ls Logo

Slime 40026 - User Manual

Slime 40026
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2 CYLINDERS FOR MAXIMUM POWER
PART #40026_Instructions 09.29.16
ATTENTION! READ ALL
INSTRUCTIONS CAREFULLY
Failure to follow warning instructions can result
in fire, injury to persons or property damage.
!
TIRE INFLATOR
Question and Answer IconNeed help?

Do you have a question about the Slime 40026 and is the answer not in the manual?

Summary

Important Safety Instructions

Read All Instructions Carefully

Emphasizes the importance of reading and following all instructions to prevent hazards.

Operational Cautions

Handling and Placement Precautions

Notes on hot surfaces, proper placement, and avoiding operation while driving.

Usage Limitations and Safety

Guidelines on continuous use, overinflation, soft inflatables, and keeping the unit away from children.

Power Source Requirements

Specifies the need for 12-volt DC power outlets rated 15 amps or higher.

How to Inflate Tires

Connect Air Fitting to Tire

Attach the twist-connect air fitting to the tire's valve stem.

Connect Power Clips to Battery

Connect the positive battery clip first, then the negative clip.

Operate and Monitor Inflation

Turn the inflator ON to reach the recommended air pressure, then turn off.

Troubleshooting Guide

Inflator Fails to Operate or Start

Solutions for thermal break, cooling periods, secure connections, and corrosion.

Inflator Runs But Does Not Inflate

Checks for connector tightness, tire leaks, and hose integrity.

Inflator Runs Slowly

Addresses issues related to overheating and low voltage from the battery.

Summary

Important Safety Instructions

Read All Instructions Carefully

Emphasizes the importance of reading and following all instructions to prevent hazards.

Operational Cautions

Handling and Placement Precautions

Notes on hot surfaces, proper placement, and avoiding operation while driving.

Usage Limitations and Safety

Guidelines on continuous use, overinflation, soft inflatables, and keeping the unit away from children.

Power Source Requirements

Specifies the need for 12-volt DC power outlets rated 15 amps or higher.

How to Inflate Tires

Connect Air Fitting to Tire

Attach the twist-connect air fitting to the tire's valve stem.

Connect Power Clips to Battery

Connect the positive battery clip first, then the negative clip.

Operate and Monitor Inflation

Turn the inflator ON to reach the recommended air pressure, then turn off.

Troubleshooting Guide

Inflator Fails to Operate or Start

Solutions for thermal break, cooling periods, secure connections, and corrosion.

Inflator Runs But Does Not Inflate

Checks for connector tightness, tire leaks, and hose integrity.

Inflator Runs Slowly

Addresses issues related to overheating and low voltage from the battery.

Slime 40026 Specifications

General IconGeneral
Model40026
Power Source12V DC
Max Pressure150 PSI
Digital DisplayYes
Auto Shut-offYes
TypePortable Air Compressor

Related product manuals