To Next PageTo Next Page
Need help?Do you have a question about the Slime SAFETY SPAIR and is the answer not in the manual?
General| Product Type | Tire Repair Kit |
|---|---|
| Brand | Slime |
| Model | SAFETY SPAIR |
| Included Components | Tire sealant |
| Compatibility | Car tires |
Components for injecting air and sealant into the tire, including hoses and cartridges.
Controls for tire inflation, pressure monitoring via dial gauge, and system operation.
Integrated LED light and backlit instructions for nighttime or low-light operation.
Device connection to a 12V vehicle power outlet via a 10-foot cable.
Attach the clear sealant hose to the tire valve stem, laying the unit flat.
Plug the inflator into the vehicle's accessory power outlet, ensuring safety precautions.
Attach the black air hose to the nozzle on the sealant cartridge.
Start system, inflate for 6 mins, check pressure, and disconnect once correct pressure is achieved.
Connect the black air hose to the tire valve stem.
Plug into power outlet and use the green button to inflate the tire as needed.
Check fuse, battery charge, connection security, and terminal condition.
Verify valve stem connection, check tire for leaks, and inspect hose fittings.
Address overheating by shutting off or low voltage by checking battery.
Instructions for cleaning sealant from tires before permanent repair.
Safety advice including hot operation, unattended use, and failure consequences.
Precautions for skin contact, ingestion, eye exposure, and first aid measures.
