EasyManua.ls Logo

Slime 40080 User Manual

Slime 40080
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PART# 40080 | REV061523ART
ATTENTION! READ ALL INSTRUCTIONS CAREFULLY
FAILURE TO FOLLOW WARNING INSTRUCTIONS CAN RESULT IN FIRE,
PERSONAL INJURY OR PROPERTY DAMAGE.
LIGHT
Bright LED for night-
time emergencies
CORDLESS
TIRE INFLATOR
AIR ADAPTER
STORAGE
Snap-in-place
storage
ON/OFF
BUTTON
QUICK CONNECT
AIR HOSE
POWER SOURCE
• Rechargeable lithium-ion
baery
• Plugs into USB A
power block
INFLATABLES | BALLS
INTEGRATED
HOSE
MANAGEMENT
DIGITAL GAUGE
• 0 - 99 PSI / 0 - 7 BAR
• Inflate® Right Technology
Auto shut-off at set
pressure
QUICK GRAB
HANDLE
Question and Answer IconNeed help?

Do you have a question about the Slime 40080 and is the answer not in the manual?

Slime 40080 Specifications

General IconGeneral
Product TypeTire Inflator
Maximum Pressure150 PSI
Model Number40080
FeaturesLED light
Power Source12V DC
Air Hose Length2 ft

Summary

Cordless Tire Inflator Overview

Light

Bright LED for nighttime emergencies.

Digital Gauge

Displays pressure (0-99 PSI/0-7 BAR) with Inflate Right Technology and auto shut-off.

Power Source

Rechargeable lithium-ion battery that plugs into a USB power block.

Integrated Hose Management

Provides convenient storage for the air hose.

Safety Precautions

Ventilation Warning

Ensure proper ventilation to avoid bodily injury or asphyxiation from vehicle exhaust.

Operating Cautions

Do not disassemble, keep away from children, ensure proper chuck connection, limit runtime.

Pressure Monitoring

Always use a pressure gauge and avoid over-inflation; be careful with soft inflatables.

Technical Specifications

Tire Inflation Time

Approximately 4 minutes for a standard tire (0-35 PSI).

Airflow Rate

0.95 CFM (26.9 LPM) at 0 PSI.

Digital Gauge Range

Measures pressure from 0-99 PSI or 0-7 BAR.

Total Reach

2 feet (0.6 meters).

Using the Inflator

Inflate Tires

Connect hose, turn on unit, inflate to recommended pressure, and turn off.

Using Inflate Right Technology

Set target pressure, start inflation, unit stops automatically at set pressure.

Recharging the Battery

Charge fully before first use and after each use; takes approx. 4 hours via USB.

Using the Light

Turn on the LED light by pressing and holding the ON/OFF button.

Troubleshooting

Inflator Does Not Turn On

Check battery charge; unit may be dead or Inflate-Right pressure may be set too low.

Inflator Runs But Does Not Inflate

Ensure connector is secured and check tire/hose for leaks or breaks.

Inflator Runs Slowly

Unit may have overheated; shut off and allow to cool for 25 minutes.

Related product manuals