Slime 40080 - Safety Precautions; Ventilation Warning; Operating Cautions; Pressure Monitoring

Ensure that the vehicle is outside, or in an open, well-ventilated area and NOT INSIDE A
CONFINED AREA, SUCH AS A GARAGE as bodily injury or asphyxiation resulting in death
could occur. Always operate the inflator in a well-ventilated area free of combustible materials,
gasoline, or solvent vapors. Always set parking/emergency brake and ensure vehicle is in Park
(or neutral if equipped with manual transmission).
CAUTION: HOT!
• Do not aempt to disassemble inator.
• No user serviceable parts inside.
• Keep inator out of reach of children.
• Ensure air hose chuck touches the core of the valve stem for proper ination.
• DO NOT use inator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inator unaended.
• ALWAYS use a pressure gauge to check tire pressure. DO NOT over-inate.
• So inatables (i.e. ras, balls, etc.) may not have recommended pressure markings. Be
careful not to inate items beyond their capacity.
• While operating, never block the inator input or output.
VEHICLE EXHAUST WITHOUT PROPER VENTILATION IS EXTREMELY
DANGEROUS. ALWAYS ALLOW FOR PROPER VENTILATION.
TECH SPECS
* (0-35 PSI, Standard Tire: P195/65 R15)
TIRE INFLATION TIME 4 min*
CFM (LPM) 0.95 CFM (26.9 LPM) @ 0 PSI
DIGITAL GAUGE PSI 0-99, BAR 0-7
TOTAL REACH 2 . (0.6 m)
POWER SOURCE Rechargeable lithium-ion baery
USING THE ADAPTERS
PULL UP
TO LO CK
PULL DOWN
TO U NLOCK
1. To unlock the quick connect, pull
handle down.
2. Place the adapter into connector
and pull up on handle to lock in.