Sloan 110 - Valve Rough-In Dimensions; Closet Flushometer Rough-In; Urinal Flushometer Rough-In; ADA Mounting Height Notes

2
VALVE ROUGH-IN
MODELS 110/111, 115
MODELS 120, 121, 122
MODEL 136
MODEL 137
MODEL 180
MODEL 186
NOTE: Requires 1” I.P.S.
(DN 25 mm) Supply.
NOTES:
• WHEN MOUNTED ON AN ADA ACCESSIBLE
BOWL, THE ROUGH-IN TO THE SUPPLY
INLET SHOULD BE NO HIGHER THAN 37½”
(953 mm) OR THE HANDLE WILL EXCEED
MAXIMUM HEIGHT ALLOWANCES UNDER
ADA GUIDELINES.
• NEW ADAAG GUIDELINES ALLOW FOR SPLIT
OR OFFSET GRAB BARS, CHECK WITH
LOCAL AUTHORITIES OR REFERENCE
SECTION 604.5.2 OF ADAAG.
† 1” CONTROL STOP IS AVAILABLE WITH
WHITWORTH THREAD.