Sly Electronics MP3 Player - Installation the Battery; 2 Connect to PC and Download; Connect to PC; Download MP3 Files

7
1.2 Installation battery
Install one LR03 AAA size 1.5V alkaline or 1.2V NiMH battery properly upon indicator on the player.
Press the  button to power the player on and enter the MP3 standby mode.
2. Connect to the PC and download
2.1 Connecting to a PC
Before operating, please make sure the player is power off. Connect the USB cable to the PC＇s USB port and connect the other side
to the player＇s post.
2.2 Download MP3 songs
To download the files from your computer, perform the following steps:
1. Open the Windows Explorer or “My computer” The new “Removable Disk” appears.
2. Select the your favorite MP3 or WMA music files on your computer and right click on your mouse to select
“copy”..
3. Open the new “Removable Disk” and right click on your mouse to select “paste”. The following picture will
appear on your player.
Indicator light will turn on, when the player is connecting with the USB port of the computer. And then turn off after 5
minutes
Indicator light will turn on when downloading the MP3 songs to player.