SMA LCS-TOOL User Manual

5 LCS tool SMA Solar Technology AG / SMA Solar Technology America LLC
24 IMVIOBOX-IA-xx-12 Installation Manual
5.2.6 Changing of Inverter
Parameters
Figure 5.15 LCS tool - changing of inverter parameters
All inverter parameter are Grid Guard protected and
require the Grid Guard code for changes. To change the
inverter settings, use your SMA Grid Guard code under the
user group Installer (see section 5.2.2, page 20).
Procedure:
1. Open the LCS tool.
2. Log in as an Installer.
3. Call up the menu Setup.
4. Enter the respective values under Inverter
Parameter.
5. Select [Save] to save the changes.
Deactivating/Activating the inverter
parameters
To activate and deactivate a parameter, double-click on the
parameter using the left mouse button. When the
parameters are activated, the input fields and buttons are
enabled. Inactive parameters are marked with disable.

SMA LCS-TOOL Specifications

General

Brand	SMA
Model	LCS-TOOL
Category	Controller
Language	English