EasyManua.ls Logo

SMA STP 17000TL-30 Technical Information

SMA STP 17000TL-30
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IPC_STP-TI-en-14 | Version 1.4 ENGLISH
Reactive power is necessary for the stability of the utility grid. With the functions "Integrated Plant Control" and
"Q on Demand 24/7", it is possible that SMA inverters of type Sunny Tripower feed in reactive power during operation
and at night. The following table provides an overview of the device types and firmware versions for which the various
functions are available.
Device type Reactive power provision
0
overexcited
to 0
underexcited
Q on Demand 24/7 Integrated Plant Control
STP 15000TL-10/
STP 17000TL-10
from firmware version
2.60.02
from firmware version
2.60.02
from firmware version
2.62.04
STP 15000TLEE-10/
STP 20000TLEE-10
from firmware version
2.61.06
from firmware version
2.61.06
from firmware version
2.63.03
STP 20000TL-30/
STP 25000TL-30
from firmware version
2.80.04
from firmware version
2.82.03
from firmware version
2.82.03
Technical Information
Integrated Plant Control and Q on Demand 24/7
SUNNY TRIPOWER

Other manuals for SMA STP 17000TL-30

Question and Answer IconNeed help?

Do you have a question about the SMA STP 17000TL-30 and is the answer not in the manual?

SMA STP 17000TL-30 Specifications

General IconGeneral
ModelSTP 17000TL-30
Rated Power17000 W
Max. AC apparent power17000 VA
Max. input voltage1000 V
Nominal AC voltage400 V
Max. efficiency98.4 %
European Weighted Efficiency98.1 %
Number of MPP Trackers2
Operating temperature range-25 °C to +60 °C
Protection classIP65
AC Frequency50 / 60 Hz
Maximum AC Power17000 W
Nominal DC Voltage600 V
Maximum DC Voltage1000 V
MPP voltage range200 V - 800 V
AC voltage range340 - 480 V
Dimensions (H x W x D)682 mm x 661 mm x 264 mm
Dimensions450 x 600 x 250 mm
TypeTransformerless inverter
Power Factor0.8 overexcited to 0.8 underexcited

Related product manuals