Need help?Do you have a question about the SMA STP 110-60 and is the answer not in the manual?
General| Model | SMA STP 110-60 |
|---|---|
| Category | Inverter |
| Max. DC Voltage | 1100 V |
| Max. Efficiency | 98.7 % |
| Nominal AC grid frequency | 50 Hz / 60 Hz |
| Power factor at nominal power | 1 |
| THD | < 3% |
| Number of DC connections per MPPT | 2 |
| Protection class | I |
| Degree of protection | IP65 |
| Operating temperature range | -25°C to +60°C |
| Rated AC Power | 110 kW |
| Max. apparent AC power | 115 kVA |
| AC nominal voltage | 400 V |
| AC grid frequency range | 45 Hz to 65 Hz |
| Maximum AC Output Power | 110 kW |
| Nominal AC Voltage | 400 V |
| Frequency Range | 45 Hz to 65 Hz |
| DC nominal power | 111000 W |
Specifies the authorized applications and environments for the product.
Provides critical safety instructions and warnings for handling the product.
Details the communication interfaces and key functionalities of the product.
Specifies environmental and structural conditions for safe installation.
Instructions for attaching the product to mounting rails.
Instructions for securing the product directly to a wall.
Outlines necessary conditions and standards for grid connection.
Detailed procedure for connecting the AC power cable.
Instructions for establishing a proper ground connection for safety.
Guide for establishing network connectivity for monitoring and control.
Steps for connecting the DC cables from the PV array.
Steps for setting up the inverter without a central management system.
Steps for integrating and configuring the inverter with a System Manager.
Final steps to activate and verify the product's operation.
Guides on modifying product settings for optimal performance.
Setting region-specific parameters for compliance and grid compatibility.
Lists and describes various error and status messages with corrective actions.
Critical safety precautions before performing any maintenance tasks.
To Next Page
