Need help?Do you have a question about the SMA STP 15000TL-30 and is the answer not in the manual?
General| Rated Output Power | 15000 W |
|---|---|
| Max. AC apparent power | 15000 VA |
| DC Nominal Voltage | 600 V |
| Max. Input Voltage | 1000 V |
| Number of MPP Trackers | 2 |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Class | IP65 |
| AC Grid Frequency | 50/60 Hz |
| Maximum AC Power | 15000 W |
Downloadable warranty conditions for the inverter.
Recognition of registered trademarks used in the document.
Official contact details for SMA Solar Technology AG.
Specifies the device types covered by this operating manual.
Defines intended users and necessary qualifications for operation.
Lists links to further technical documents and resources.
Explains hazard, warning, and notice symbols used in the manual.
Defines common terms and designations for inverter components.
Details proper and intended applications and restrictions for the inverter.
Crucial safety guidelines to prevent personal injury and property damage.
Lists and illustrates all parts included in the inverter package.
Describes the main features, design, and components of the Sunny Tripower.
Details various communication interfaces and operational features like Speedwire/Webconnect.
Specifies environmental and structural criteria for installing the inverter safely.
Step-by-step instructions for physically attaching the inverter to a mounting surface.
Critical safety measures to prevent electrical hazards during connection.
Identifies and describes all external connection points on the inverter.
Details cable specifications, protection, and connection procedures for AC power.
Specifies requirements for connecting PV modules and the array to the inverter.
Outlines the sequential steps for initial inverter setup and configuration.
Guide to selecting and setting country-specific operational parameters.
Final procedures for closing the inverter and initiating operation.
General steps for adjusting inverter settings via rotary switches or communication.
Instructions for connecting the inverter to a local network for monitoring.
Details how to modify inverter operational settings using a communication product.
Configuring power limitation for PV system control failure scenarios.
Steps to activate and set up the Modbus communication interface for data exchange.
Explains the meaning of different LED states indicating inverter operational status.
Describes the information presented on the inverter's display screen.
Instructions on how to activate, navigate, and operate the inverter's display interface.
Method to view messages shown during the inverter's start-up sequence.
Step-by-step guide to safely de-energize and disconnect the inverter.
Electrical parameters for DC input from PV modules, including voltage and current limits.
Electrical parameters for AC output to the grid, including voltage, current, and power.
Details on maximum and weighted energy conversion efficiency of the inverter.
Information on built-in safety features, protection circuits, and monitoring capabilities.
Physical dimensions, weight, operating temperature range, and noise emission levels.
Lists available optional accessories for the inverter and their order numbers.
Provides contact details for technical assistance from SMA Service Line by region.
Confirms inverter compliance with Electromagnetic Compatibility and Low Voltage Directives.
To Next Page
