SMA America, LLC 10 Troubleshooting
Installation Manual SB30-40-US-IA-en-33 67
CO2-Fact The inverter assesses the
yield and displays the
approximate amount of
CO
2
that the inverter has
saved.
The amount of CO
2
is
calculated by multiplying
the generated kWh
(E-total) by the factor
defined in the parameter
"CO2".
0lb./kWhto 2lb./
kWh
1.7 lb./kWh
Default Defines the country
standard for adjusting
country-specific
information. Tip: After
changing one of the
parameters marked with
"*", the parameter
"Default" automatically
changes to adjusted.
USA/UL1741/
2005
USA/
UL1741/
2005
OFF_Grid
NON IEEE1547
E_total Total energy yield of the
inverter.
It may be necessary to
change this if you replace
your inverter and want to
use data from the old
device.
0kWhto
200,000 kWh
0 kWh
Fac-delta–* Maximum permissible
frequency deviation below
the power frequency of
60 Hz before the grid
monitoring disconnects the
device from the power
distribution grid. The
standard value is optimal
for plants ˂ 30 kW.
0.2 Hz to 3.0 Hz 0.69 Hz
(for the
country
setting USA/
UL1741/
2005)
Name Description Value/range Explanation Default
value
To Next Page
Loading...
