SMA America, LLC 10 Troubleshooting
Installation Manual SB30-40-US-IA-en-33 69
Memory Function no function no function
Default param. Sets all
parameters to
the standard
value.
Reset Op.Data Sets all
parameters that
are visible on
the user level to
the standard
values.
Reset errors Resets all
permanent
errors that lead
to device
disconnection.
Operating Mode Operating modes of an
inverter
MPP-Operation Sets the inverter
to the operating
mode "MPP"
MPP
Turbine Sets the inverter
to the operating
mode "Turbine"
V-const Sets the inverter
to the operating
mode "V-Const"
Stop Disconnection
from the power
distribution grid,
no operation
T-Max-Fan Temperature at which the
fan reaches the maximum
fan speed.
32°F to 212°F
(0°C to 100°C)
194°F
(90°C)
T-Start Gird monitoring time:
Time during which the
inverter monitors the
power distribution grid
before connecting.
This value defaults to
5 minutes after a grid fault.
5 s to 1,600 s 10 s
Name Description Value/range Explanation Default
value
To Next Page
Loading...
