EasyManua.ls Logo

smaco F36AR - RV Ventilation Fan Important Notes; RV Ventilation Fan Usage Precautions; RV Ventilation Fan Safety Guidelines; RV Ventilation Fan Troubleshooting Guide

smaco F36AR
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notes
Precautions for use
1. To ensure safety, please read the instructions carefully before installation and use.
2. The power must be disconnected before moving, cleaning or sending for repair.
3. After unpacking the product, check for any irregularities. If you find any abnormalities after
unpacking, please contact the after-sales service centre for service.
4. Before switching on the power, check and ensure that the supply voltage matches the
voltage of the product.
5. Do not excessively bend, pull or tangle the power cable and internal wiring.
6. Avoid using additional multi-couplings and extension cords as far as possible. If necessary
the part must be compatible with the safety regulations for the use of ventilation fans.
7. This ventilation fan is restricted to the use of the caravan equipment and should not be
used for other purposes.
8. The ventilation fan is a perishable product, please do not lift the transparent cover of the
ventilation fan by hand or with other tools.
Safety precautions
1. Do not insert fingers, pencils and other similar objects into the mosquito screen when the
ventilation fan is in operation.
2. Do not touch the ventilating fan with wet hands or feet.
3. Keep away from babies and young children when the ventilation fan is in operation.
4. Once the product has been unpacked, please take care to prevent babies and children from
touching the box or the screws and other accessories to prevent accidental swallowing and
other injuries.
Common Problems and Troubleshooting
Serial
number
Description of the
problem
Cause Analysis
Suggested solutions
1
Leaking sunroof
1. The ventilation fan and the
roof are completely glued to
each other, which is the root
cause of water leakage.
To install the ventilation fan, first
apply a ring of glue around the edge
of the roof opening again and then
fix it with the spare screws.
2. The roof wall panel sandwich
material is aging, the middle filler
is separated from the panel, and
the sunroof opening is separated
from the roof panel after a long
period of shock, and cracks are
produced by the glue. From
there, water leaks in.
Clean the edges of the roof opening
when installing, then add a wooden
board in the middle of the ply to
reduce vibration in the opening.
7/47