smaco S300 - Storage and Dispose Conditions

To Next Page

To Previous Page

Storage Conditions:

It should be stored in the place with ambient temperature of 5

C~30

and relative humidity of 40%~70%;

It should not be placed within one meter from the heat source and in the

direct sunlight;

The warehouse where scuba is stored should not have oils, acids, alkalis

and other gaseous substances that can damage rubber material.

Transportation Conditions:

SMACO S300 scuba is small in size and light in weight, so it’s very

convenient to carry. Violent shocks and vibrations during transportation

should be avoided. It should be kept clean without contacting with oils,

acids, alkalis and other substances that damage rubber and fabrics.

Deposite Conditions

The product should be disposed if the following cases occur:

The product itself is damaged, that is, it meets the disposal requirement

and cannot be used any more; for example, the cylinder case is broken,

the screw of cylinder valve is damaged or deformed, the cylinder valve or

cylinder is deformed;

Only two years of service life. When the product reaches the expiration date,

it meets the disposal requirement so it’s strictly forbidden to use it any more.

6.1

6.2

6.3

STORAGE AND DISPOSE CONDITIONS06