Smanos MD7000 User Manual

EN EN
Introduction
The detector works based on detecting human body’s infrared
spectrum. When human moves within the scope, the detector
receives the signal and inputs it into microprocessor after
magnication. Microprocessor continues to sample infrared signal
and send wireless signal to wireless control panel after calculating,
thus to form a security system. The product can be applied in banks,
warehouses and homes etc.
Features
Accurate Detection
360° detection, no dead angle
Automatic temperature compensation and anti-air turbulence
technology
False Alarm Prevention
Digital dual-core fuzzy logic infrared control processing technology
Effectively identify interference signals from body movement signals
through intelligent analysis
Space-saving
Ceiling-mounted, not much space occupation
Integrated to home decoration, suitable for luxury premises
Energy-saving
Featured power-saving mode enables 1 year standby
Product Overview
1. Test Button
2. Detection Lens
3. LED Indicator
4. Mounting Plate
PCB Layout
LED ON/OFF
Infrared Sensor

Smanos MD7000 Specifications

General

Detection Angle	110°
Battery Life	Up to 1 year
Radio Frequency/Frequency	433MHz
Operation Condition/Operating Temperature	-10°C to 50°C
Installation	Wall-mounted
Compatibility	Smanos alarm systems
Type	Motion Detector
Detection Range	12m
Static Current	15μA
Alarm Current	20mA
Transmission Distance/Wireless Range	100m
Housing Material	Plastic
Relative Humidity/Operating Humidity	≤ 95%