Need help?Do you have a question about the Smanos FD2100 and is the answer not in the manual?
Details the LED signals for liquid detection and low battery status.
Illustrates the detector's components like LED indicator, transmitter, and probes.
Shows the internal layout including the tamper switch and battery slots.
Guides on pairing the detector with the control panel via alarm simulation.
Explains how to open the detector case and replace batteries correctly.
General| Compatibility | Smanos Alarm Systems |
|---|---|
| Housing Material | ABS Plastic |
| Operation Condition - Temperature | -10°C to 50°C |
| Connectivity | Wireless |
| Operating Temperature | -10°C to 50°C |
| Detection Angle | 110° |
| Power Supply | 1 x CR123A battery |
| Standby Current | < 5μA |
| Transmitting Distance | Up to 80m (open area) |
| Radio Frequency | 868MHz |
| Operation Condition - Humidity | Up to 95% RH |
To Next Page