Smanos MD2300 User Manual

EN EN
Introduction
With digital dual-core fuzzy logic control processing technology
and intelligent analysis algorithm, the detector can detect infrared
rays released from human body. Featuring automatic temperature
compensation and resistance to airow technology, it can identify
interfering signals and human movement signals, thus preventing
false alarm. Being able to detect human movement within 8-meter
cone space, it is suitable for applications in halls, hallways, etc. Its
low power feedback function enables users to get the SMS alert
about low battery when it is connected to GSM alarm system.
Overview
Detection
Lens
Test Button
Bracket Slot
Double-sided
Tape Stick
Place
LED
Indicator
LED Indication
Flash continuously: Self-testing.
Flash once: Intrusion is detected.
Flash twice: 3 minutes testing mode is nished, enters into power
saving mode.
Flash once per 3 seconds: Low battery indication. Users will receive
SMS notication if detector was connected with panel. Please
change the batteries immediately.
PCB Layout
LED Indicator
Tamper Switch
Infrared Sensor
Infrared sensor: It detects the infrared rays released by human body
motion. Please do not touch the surface and always keep it clean.
Tamper switch: Once the case is opened in work mode, the tamper
switch is triggered and then generates an alarm signal.

Smanos MD2300 Specifications

General

Brand	Smanos
Model	MD2300
Category	Security Sensors
Language	English

Summary

Introduction

Overview

LED Indication

Explains LED flash patterns for device status like self-testing, intrusion, and low battery.

PCB Layout

Identifies key components on the circuit board, including sensors and switches.

Infrared Sensor Function

Details the infrared sensor's role in detecting human motion and maintenance advice.

Tamper Switch Function

Describes the tamper switch's security function to generate an alarm when the case is opened.

Detection Range

Connect PIR Motion Detector

Working Mode

Testing Mode

Explains how to enter testing mode, detection frequency, and transition to power saving.

Power Saving Mode

Installation Steps

Choose Installation Location

Recommends mounting height and general location suitability for optimal performance.

Fix the Detector

Details attaching the detector to its bracket and the wall using screws or tape.

Test PIR Motion Detector

Installation Notices

Mount Near Entry/Exit

Advises placing the detector near entry/exit points for effective intrusion prevention.

Mount at Proper Angle

Explains how installation angle affects sensitivity and optimal positioning.

Avoid Facing Glass Windows

Avoid Facing Heat Sources

Avoid Facing Swinging Objects

Product Specifications

CE Declaration of Conformity

FCC Statement

Industry Canada Notice