SMART 453 Series - Page 21

20
P00.00-5255-00 P00.00-5256-00
Introduction of the New smart fortwo coupé and smart forfour | Model Series 453
Vehicle views
Overall vehicle
Rear end
At the rear end of the new smart fortwo coupé, the raised
lettering on the lower part of the split ligate indicates the
brand identity. As on predecessor models, the separation of
the upper and lower parts provides loading versatility for both
light and heavy items. The top edge takes the form of a roof
spoiler with integrated center high-mounted brake lamp.
The rear lamps, which are set into the tridion safety cell,
give the design a particular sense of quality and underline
the width of the vehicle at the rear end. The license plate is
mounted between the lamps in the ligate. The bottom edge
of the bumper, which is painted in the vehicle color, is black
and has a cutout on the le (viewed in the direction of travel)
for the visible tailpipe of the exhaust system. A sport exhaust
tip is available for the exhaust system, while the bumper also
houses the distance sensors.
In principle, the smart forfour features the same design
elements as the smart fortwo coupé. However, it has a one-
piece, upward-opening ligate with smart logo, which also
accommodates the reversing camera special equipment.
On this variant, the license plate is fitted to the dual-color
bumper.
Rear view of smart fortwo coupé Rear view of smart forfour
– This printout will not be recorded by the update service. Status: 06/2014 –