To Next PageTo Next PageWhat to do if my SMART BC-012-25AT has no DC output or won't start?
If your SMART Battery Charger isn't starting up or has no DC output, the possible causes include: no AC input, which means you should check the AC power source; over temperature shutdown, so allow the charger to cool down; bad contact of the battery terminal, thus check the connection between the charger and the battery; or an output short circuit.
Why is my SMART BC-012-25AT Battery Charger's charging not stable?
If the SMART Battery Charger is not charging the battery stably, it could be due to the AC input voltage being too low, so keep the input voltage within the acceptable input range. Another cause may be wrong selection of charging voltage, in this case press correctly.
How to fix a SMART Battery Charger that cannot switch to 'FLOAT'?
If your SMART Battery Charger isn't switching to 'FLOAT', it might be because the battery cable connected to the battery is too thin, so change the cable to a proper size. Alternatively, the battery may be in poor condition, so replace it with a new one.
General| Brand | SMART |
|---|---|
| Model | BC-012-25AT |
| Category | Battery Charger |
| Language | English |
Key advisory text for users before operating the smart battery charger, emphasizing careful reading of the manual.
Overview of the smart battery chargers BC series, highlighting their 4-step charging and advanced features.
Critical safety notice regarding the risk of electric shock when the device is connected to the AC power source.
Identifies and labels the various components shown in Fig 1 for specific charger models.
Identifies and labels the various components shown in Fig 2 for different charger models.
Detailed steps and explanations for using the device as a smart battery charger, including stage descriptions.
Instructions for using the device as a power supply unit, including switch settings and LED indicators.
Table detailing dip switch settings for various battery types and output voltage configurations.
Important safety precautions and usage guidelines for operating the battery charger.
Common issues, their possible causes, and suggested remedies for the battery charger.
Essential safety guidelines and procedures to follow during the operation and handling of the device.
Technical specifications for BC-12 models, including input voltage, current, capacity, and dimensions.
Technical specifications for BC-024 models, detailing input voltage, current, capacity, and dimensions.
Details the warranty coverage, limitations, and procedures for repair services.
Guidelines for the proper and responsible disposal of the device when it becomes unusable.
