X
Press 9 or : to scroll to Settings.
X
Press 9 or : to scroll to the desired
menu.
X
Press 9 or : to set the desired data.
X
Press a to confirm.
Resetting values
X
Press a.
X
Select yes and press a to confirm.
Setting the time
X
Select Settings > Time > Set the time.
X
Set values.
Vehicles with smart Media-System: the
time and time format are set in the smart
Media-System.
Setting the time format
X
Select Settings > Time > 12/24 Time for‐
mat.
X
Set the value
Adjusting the instrument cluster light-
ing
X
Select Settings > Display > Display/
switch brightness.
X
Set the value
Displaying the digital speedometer in the
header
X
Select Settings > Display > Digital
speedometer.
X
Select the Disp. addit. dig. speedo.
function.
The digital speedometer is displayed in
the header.
England only: the digital speedometer in the
header cannot be hidden.
Setting the unit for speed in the digital
speedometer
X
Select Settings > Display> Digital
speedometer > Unit.
X
Set the value
The following values are set:
R
Digital speedometer display
R
Digital speedometer in the header
England only: only the display unit of the
digital speedometer is set.
Setting the unit of measurement for dis-
tance
X
Select Settings > Display > Units of
distance.
X
Set the value
Setting the temperature unit
X
Select Settings > Display > Units of
temperature.
X
Set the value
Switching radar-based recuperation off
and on
To switch on radar-based recuperation, the
conditions for activation must be fulfilled
and the ignition must be switched on.
X
Select Settings > Radar assist.recuper‐
ation > on or off.
Information on radar-based recuperation
(Y page 62).
Deactivating or activating Active Brake
Assist
The ignition must be switched on in order to
set Active Brake Assist.
X
Select Settings > Active Brake Assist >
on or off.
Information on Active Brake Assist
(Y page 51).
Starting the tyre pressure monitor
X
Select Settings > Tyre pressure monitor.
Information on the tyre pressure monitor
(Y page 154).
Switching ambient lighting on/off
X
Select Settings > Ambient lighting > On.
Setting values
103
>> Operating the on-board computer.
Z