Calling up the detailed consumption
display
X
Select Menu > Vehicle > electric drive >
Consumption details.
The Consumption details display shows the
energy consumption of the drive and elec-
trical consumers as well as the energy recu-
perated during the previous 15 minutes. The
display also shows the total consumption of
the drive and electrical consumers as well as
the total amount of energy recuperated dur-
ing the current journey.
The Consumption details display is reset
each time the engine is switched on.
Using a mobile phone
Connecting a mobile phone
Please note
G
WARNING
The electromagnetic radiation from two-
way radios can interfere with the vehicle
electronics if they are manipulated or ret-
rofitted incorrectly. This could jeopardise
the operating safety of the vehicle. There is
a risk of an accident.
You should have all work on electrical and
electronic components carried out at a
qualified specialist workshop.
G
WARNING
If you operate two-way radios incorrectly
in the vehicle, their electromagnetic radi-
ation can interfere with the vehicle elec-
tronics, for example if:
R
the two-way radio is not connected to an
exterior aerial
R
the exterior aerial is not correctly moun-
ted or is not low-reflection
This could jeopardise the operating safety
of the vehicle. There is a risk of an accident.
Have the low-reflection exterior aerial fit-
ted at a qualified specialist workshop.
When operating two-way radios in the
vehicle, always connect them to the low-
reflection exterior aerial.
Bluetooth
®
must be enabled both on the
mobile phone and on the smart Media-Sys-
tem.
Enabling and disabling Bluetooth
®
The mobile phone must be compatible with
the smart Media-System.
Overview of compatible mobile phones:
https://www.smart.com/connect.
X
Select Settings > Enable Bluetooth.
The setting is marked. Bluetooth
®
is ena-
bled or disabled on the smart Media-Sys-
tem.
Authorising a mobile phone
Authorising a mobile phone for the first
time
Bluetooth
®
must be enabled on the smart
Media-System.
X
Select the Telephone menu.
X
Confirm the display message with Yes.
X
Enter the security code on the mobile
phone or accept access confirmation (see
manufacturer's operating instructions).
The message Bluetooth is enabled is
shown.
Authorising another mobile phone
Bluetooth
®
must be enabled on the smart
Media-System.
X
Select Settings > Manage devices.
The list of visible mobile phones is dis-
played.
X
Select a mobile phone from the list.
X
Enter the security code on the mobile
phone or accept access confirmation (see
manufacturer's operating instructions).
The Bluetooth
®
connection is established.
The Bluetooth
®
connection will be estab-
lished automatically in future.
120
Using a mobile phone
>> Using the smart Media-System.
To Next Page
Loading...
Need help?
General
