EasyManuals Logo

SMART Forfour 2017 User Manual

SMART Forfour 2017
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
R
Immediately change out of clothing
which has come into contact with tyre
sealant.
R
If an allergic reaction occurs, seek med-
ical attention immediately.
G
WARNING
A tyre temporarily sealed with tyre sealant
impairs the driving characteristics and is
not suitable for higher speeds. There is a
risk of accident.
You should therefore adapt your driving
style accordingly and drive carefully. Do
not exceed the specified maximum speed
with a tyre that has been repaired using
tyre sealant.
The maximum permissible speed for a tyre
sealed with tyre sealant is 80 km/h.
!
After use, excess tyre sealant may run out
of the filler hose. This could cause stains.
Therefore, place the filler hose in the plas-
tic bag that contained the TIREFIT kit.
H
Environmental note
Have the used tyre sealant bottle disposed
of professionally, e.g. at a qualified spe-
cialist workshop.
Comply with the manufacturer's safety
instructions on the sticker on the tyre infla-
tion compressor.
Filling with tyre sealant
X
Leave foreign bodies which have penetra-
ted the tyre in the tyre.
X
Remove the vehicle tool tray.
X
Remove the TIREFIT kit, consisting of a
tyre sealant bottle and a tyre inflation
compressor, from the vehicle tool kit.
X
Affix the 80 km/h maximum speed sticker to
the instrument cluster within the driver's
field of vision.
X
Unwind plug : with the cable from tyre
inflation compressor ;.
X
Remove hose A from the bottom section of
tyre inflation compressor ;.
X
Unscrew the cap from tyre sealant bot-
tle ?.
X
Connect hose A.
X
Remove valve flap from valve E on the
faulty tyre.
X
Unscrew cap from filler hose =.
X
Screw filler hose = onto valve E.
X
Insert connector : into the cigarette
lighter socket or the 12 V socket.
X
Turn the key to position 1 in the ignition
lock.
X
Press on/off switch B on tyre inflation
compressor ; to position 1.
The tyre sealant is pumped into the tyre.
The pressure may briefly rise to approx-
imately 600 kPa (6.0 bar/86 psi) in pressure
gauge C.
i
Preventing damage to the tyre inflation
compressor
168
Sealing tyres using the TIREFIT kit
>> Dealing with accidents and breakdowns.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMART Forfour 2017 and is the answer not in the manual?

SMART Forfour 2017 Specifications

General IconGeneral
BrandSMART
ModelForfour 2017
CategoryAutomobile
LanguageEnglish

Related product manuals